Adjusting The Brake Pedal And Rear Brake Lever - Yamaha Bruin 250 Manual Del Propietário

1. Locknut (× 2)
a. Brake pedal position
1. Contre-écrou (× 2)
a. Position de la pédale de frein
1. Contratuerca (× 2)
a. Posición del pedal del freno
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste

Adjusting the brake pedal and rear brake lever

Adjusting the brake pedal height
1. Remove the footboard. (See page 8-21.)
2. Loosen the adjusting bolt locknuts.
3. Turn the adjusting bolt so that the top of the
brake pedal is positioned 43–53 mm above
the top of the footboard bracket.
4. Tighten the adjusting bolt locknuts.
8-65
EBU15442