Clutch Adjustment - Yamaha Bruin 250 Manual Del Propietário

1. Locknut
a. Decrease
1. Contre-écrou
a. Réduire
1. Contratuerca
a. Reducir
2. Adjusting bolt
b. Increase
2. Boulon de réglage
b. Augmenter
2. Perno de ajuste
b. Incrementar

Clutch adjustment

1. Remove the footboard. (See page 8-21.)
2. Loosen the locknut.
3. Slowly turn the adjusting bolt counterclock-
wise until resistance is felt. Then, turn it
1/8 turn clockwise.
4. Tighten the locknut to specification.
Tightening torque:
15 Nm (1.5 m·kgf)
NOTE:
_
Turn the adjusting bolt counterclockwise to de-
crease the clutch free play and turn it clockwise to
increase the free play.
_
5. Install the footboard.
8-75
EBU15470