Technical Data; Disposal - Grundfos LC A2 Instrucciones De Instalación Y Funcionamiento

8. Technical data

Enclosure
Flame-retardant polystyrene according to UL 94 V-0
or 94 V-2, impact-resistant, bicolour, with integrated
socket (can be switched on or off), two cable glands
with cable relief, 2 x M12 x 1.5.
Power supply
230 V, 50 Hz, short-circuit-proof safety isolating
transformer.
No-load power consumption: 0.2 VA.
Power consumption in case of alarm: approx. 2 VA.
Input
Potential-free normally open contact, min. 24 V, 75
mA.
Output
Potential-free contact, 3 A, 250 VAC or 3 A, 30 VDC,
short-term 5 A.
In case of alarm, the socket can be switched on/off
(15 A / 250 VAC, 1-pole). It can also be used as
feed-through socket.
An acoustic alarm signal is possible by means of a
piezoelectric buzzer with a tone sequence signal of
97 dB / 1 m.
Ambient temperature
0-40 °C.
Dimensions
140 x 60 x 90 mm.

9. Disposal

This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
8