SATA AE1032H Manual De Instrucciones página 75

8. Set the bead breaking unit to the rest position
9. Tyre inflation
- For inflation, see "INFLATION" section
10. Unclamping the wheel from the turn¬table (fig. 30)
- Loosen the device by turning the handles 1 anticlockwise (A).
- Press the retainers 2 and move the centring cone away from
the rim by hand (B).
- Turn the clamping device anticlockwise to release it from
the turntable (C).
- Remove the device from the rim (D).
11. Tyre unloading (fig. 31)
- Lower the wheel lifter (pedal 29) and position the wheel on
it by hand (A).
- Lower the lifter (pedal 29) (B).
- Remove the wheel from the lifter.
( Fig. 30 )
AE1032H
For the detailed M/D procedure for UHP and
RUN FLAT tyres, please refer to the instruction
manual wrote by WDK (German Association of
the Tyre Industry)
75
- 03 -
EN DE RU KO PT
( Fig. 31 )
JA ES