Functions - Sage the Bambino BES450 Guía Rápida

Functions

FIRST USE
1. Remove the water tank and fill it with
potable water to the indicated MAX line.
Place the water tank back firmly onto the
machine.
2. Ensure that the drip tray is firmly placed
on the machine.
3. Place a 500ml container under the
portafilter and steam wand for the water
drips for this first cycle.
4. Plug the power cord into the power outlet,
and the 1 Cup button illuminates.
5. Press the 1 Cup button to begin the first
use cycle.
NOTE
The first use cycle is to rinse the machine
and prime the heating system.
STANDBY MODE
To turn off the operation and enter standby
mode, press the 1 Cup and Hot Water
buttons for 0.5 second simultaneously.
+
NOTE
Unit will enter 'standby mode' when idle or no
interaction from user after 10 minutes.
12
FILLLING THE WATER TANK
Lift the water tank from the machine. Remove
the water tank lid and add potable water to
the water tank, filling to the MAX marking
indicated.
Replace the water tank onto the machine,
press down ensuring it is properly attached
and sitting flush against the back of the
machine.
NOTE
Machine LED lights will flash 6 times for
3 seconds when no water is detected in the
water tank.
FILTER BASKETS
This machine includes both single and dual
wall 1 Cup and 2 Cup filter baskets.
1 CUP
1 CUP
Use the 1 cup filter basket when brewing a
single cup and the 2 cup filter baskets when
brewing 2 cups or a stronger single cup or
mug.
0.5s
Adjust the grind amount and size if switching
from a single basket to a double basket, or
vice versa.
The provided filter baskets are designed for:
1 Cup filter basket = 8-11g
2 Cup filter basket = 16-19g
2 CUP
2 CUP