Usage; Further Information - Vinten Vector 750 Manual Del Usuario

English
The Vector 750 pan and tilt head is designed for use in broadcast and film studios to support and balance
a camera and ancillary equipment weighing up to 75 kg (165.3 lb), and must be mounted on equipment
designed to support a minimum payload of 95 kg (209 lbs.) The Vector 750 pan and tilt head is intended
for use by professional TV broadcast and film camera operators.
WARNING!
For further information or advice regarding this pan and tilt head, please contact Camera Dynamics
Limited, your local Vinten distributor (see back cover) or visit our website.
For details on maintenance and spare parts, please refer to the Vector 750 Pan and Tilt Head Maintenance
Manual and Illustrated Parts List (Publication Part No. V4034-4990) This is obtainable from Camera
Dynamics Limited or your local Vinten distributor. For information on-line, visit our website at
4

Usage

1. Do NOT attempt to use this product if you do not understand how to
operate it.
2. Do NOT use this product for any other purpose than that specified
in the Usage statement above.
3. Maintenance beyond that detailed in this Operators Guide must be
performed only by competent personnel in accordance with the
procedures specified in the Maintenance Manual.

Further information

www.vinten.com