Canon EOS RT Instrucciones página 8

To find out which functions have been set,
press pgll the film winding mode button
and the battery check button to display the
control number. Turn the electronic input
dial. A bar mark appears if the function is
set.
Additional Information for
Custom Function Control
1 . W h e n u s i n g F u n c t i o n # 4 , b e s u r e t o
p r e s s t h e p a r t i a l m e t e r i n g b u t t o n f i r s t
a n d t h e n t h e s h u t t e r b u t t o n . l f t h e b u t -
tons are pressed in reverse order, au-
t o f o c u s m a y b e i m p a i r e d .
2 . l f F u n c t i o n s * 1 0 a n d 1 2 a r e b o t h s e t ,
+ 1 0 h a s p r i o r i t y .
3 . W h e n F u n c t i o n + 1 0 a n d A E B o r m u l t i -
p l e e x p o s u r e s a r e c o m b i n e d , c o n t i n u -
ous exposure takes place after their
c o m p l e t i o n .
1. When using the self-timer, be sure to attach the
viewfinder cover if your eye will not be at the
viewfinder when the shutter button is pressed.
2. The flash coupling range decreases by 20o/o; tor
example, 1.0 - 5.0 m/3.3 - 16.4 ft becomes 0.8
- 4. O m 12.6 - 13. 1 f t.
3. Overexpose by 2/3 step in the following cases
(for example, set the film speed to ISO 64 when
usi ng I S O 100 f i l m):
1)When using the Speedlite 42OEZ or 430E2
in the manual mode.
2) When using A and T series Speedlites in the
auto mode.
3) When using a hand-held meter.
4. When using Speedlite 420 EZ or 430 EZ in
manual mode, the decreased shooting distance
is displayed on the Speedlite's LCD panel,
5. When using A-TTL or TTL automatic flash shoot-
ing mode, exposure compensation is not
necessary.
6. The Technical Back E cannot be used.
7. When using the Quartz Date Back E, date im-
printing is impossible with the real time release
mooe.