Conex ® Dis-G Terminal Assignment; Power Supply Connection - Grundfos Conex DIS-G Instrucciones De Instalación Y Funcionamiento

®
10.1 Conex DIS-G terminal assignment
1 3 5 7 9
2 4 6 8 10 12
L N PE
Power supply
®
Fig. 6 Conex DIS-G terminal

10.2 Power supply connection

Before connecting, check that the values
for the supply voltage and frequency
Caution
correspond to the values on the
nameplate.
Voltage supply for Conex
• Connect the protective conductor (PE) to terminal
6.
• Connect the neutral conductor (N) to terminal 4.
• Connect the phase (L) to terminal 2.
Switch the device on and off by switching
the power supply on and off accordingly.
Note
The device itself is not equipped with a
separate on/off switch.
Voltage supply for electrically isolated relay
contacts:
• Connect the protective conductor (PE) to terminal
5.
• Connect the neutral conductor (N) to terminal 3.
• Connect the phase (L) to terminal 1.
18
11 13 15 17
14 16 20 21
+
> 1000 m
®
DIS-G:
23 24 18 19
- + -
26 27 29 30
+ - - +
> 100 m