geberit ECO 301 Manual De Operación página 28

EN
Pressing with pressing jaw
Prerequisites
• Pipe ends are deburred and clean
• Pipe and pressfitting have been fitted together in accordance with the piping system
installation manual
WARNING
Risk of injury caused by flying fragments if used incorrectly or if worn or damaged
pressing jaws are used
Only use the pressing attachments if they are in perfect working order (see the
basic safety notes)
Make sure that the diameter of the pressfitting matches the diameter of the
pressing jaw
Do not tilt the pressing jaw on the pressfitting
Clean away any dirt, chips or the like between the pressing jaw and the pressfitting
If the pressing jaw has been used incorrectly, or in a way that does not comply with
its intended us, do not continue to use it and have it inspected by an authorized
repair shop
Wear suitable protective equipment (protective goggles etc.)
Pressing attachments (pressing jaws, adapter jaws, pressing collars) are wearing
parts. Frequent pressing will cause the material to become worn; advanced stages of
wear will be indicated by cracks in the material. Pressing attachments that display this
kind of wear or are damaged in any other way may break, particularly if they are used
incorrectly (e.g. pressing a fitting that is too large, tilting, foreign bodies on the fitting,
etc.) or in a way that does not comply with their intended use.
WARNING
Danger of crushing by the pressing tool automatically closing
Do not hold any parts of your body or other objects in between the pressing jaws
and adapter jaws
Do not hold the pressing tool in the area of the pressing jaws or adapter jaws
CAUTION
Damage to the device caused by continuous operation
Allow the pressing tool to cool for at least 15 minutes after 30 minutes of
continuous operation
To perform a pressing operation with adapter jaws and pressing collars, see the user
manual for the respective system.
1
Make sure the pressing jaw matches the diameter of the pressfitting.
2
Connect the pressing tool to the power supply system.
28
B266-004 © 05-2015
964.869.00.0 (03)