Technical Data - geberit ECO 301 Manual De Operación

EN
Retaining pin securing mechanism
An electronic safety mechanism checks whether the retaining pin has been pushed in as far
as the stop. If the retaining pin is pushed in incorrectly, the pressing tool cannot be switched
on.

Technical data

Nominal voltage
Mains frequency
Power consumption
Protection class
Protection degree
Cable length
Nominal force
Pressing range
Net weight
Sound pressure level at user's ear
Vibration emission value
Temperature range during operation
Measurement inaccuracy of the sound pressure level: 3 dB(A)
Measurement inaccuracy of the vibration emission value: 1,5 m/s
The stated vibration emission value has been measured according to a standardised test
process and can be used for comparison with another device. The stated vibration emission
value can also be used for an introductory estimation of the exposure.
Please note: The vibration emission value can differ from the stated value during the actual
use of the device, depending on the way the device is used. Depending on the actual
operating conditions (intermittent operation), it can be necessary to determine safety
measures to protect the operator.
26
See specification plate
See specification plate
See specification plate
II
IP20
5
45
ø 12–108
5
78
≤ 2,5
-20 – +60
2
m
kN
mm
kg
dB(A)
2
m/s
°C
B266-004 © 05-2015
964.869.00.0 (03)