Operating Elements; Preparation - Soehnle Body Balance Slim Design FT 5 Instrucciones De Manejo

GB
1.
2.
3.
28
1 2 3

Operating Elements

1. Confirm ( )
2. Minus (▼)
3. Plus (▲)

Preparation

1. Insert batteries.
The time settings mode will
open automatically.
2. Time: SET hours (▼ = minus,
▲ = plus) and confirm (
3. Time: SET minutes
(▼ = minus, ▲ = plus) and
confirm ( ).
Note:
Immediately after inserting the
batteries and setting the time
(while "0.0" is still being
displayed), place the body
analysis scale on a level surfa-
ce and wait until the scale
powers down automatically.
Then begin with data entry.
Otherwise, it might be possible
that the weight of the scale
would erroneously be added to
the initial weighting process.
The same might occur if the
scale is held in the hand prior
to the weighing process.
).