Maintenance Intervals; Filter Cleaning - Stanley Bostitch GF28WW Manual De Instrucciones

MAINTENANCE INTERVALS

© Stanley Bostitch
Maintenance intervals for the tools can vary
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
depending upon the environment the tool is being
compliance for the products.
operated in, the application it is being used for and
the volume of nails that are being driven. For
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
example, if it is being used in dirty and dusty
rien que les produits soient conformes aux normes CE.
conditions for high volume nailing, maintenance will
be required more regularly rather than in clean
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
conditions with low volumes of nails.
die CE-Richtlinien für Produkte.
The chart that follows has been produced as a guide
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
to help you establish the maintenance intervals for
zeggen dat de producten voldoen aan de CE-vereisten.
the tools. If you experience an excessive build up of
debris within the tool between cleans, reduce the
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
maintenance intervals. If the tool does not require
produkterne.
cleaning within the schedule you have established,
then you may be able to extend the maintenance
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
intervals. If you have any questions regarding the
above please contact your local distributor for help
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
and advice.
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
Maintenance Intervals GF33PT-E / GF28WW-E / GCN40T-E:
conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
Very dirty & dusty 3-4
merking for produktet.
Dusty 10-14 10-14
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
Moderate 30-45 30-45
conformidade com a CE para os produtos.
Clean 45-60 45-60
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
1
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
Number of Days Between
Maintenance Operations
3-4 3-4 3-4
10-14 3-4
30-45 10-14
45-60 30-45
2 4 6
Weekly Nail Usage [x1000]

FILTER CLEANING

The 'fig' references for this are supplied on the
seperate sheet 'Filter Cleaning / Tool Cleaning &
Lubrication Guide' for easy reference.
When working on the tools, do not lose any parts of
the disassembled tool and use only genuine Stanley
Bostitch parts to ensure proper tool operation and
safety.
1. Before cleaning, check that the tool has cooled
down completely, and then remove all nails, the fuel
cell and the battery from the tool (Fig. 25).
2. Using a 4mm hex key, remove and retain the hex
socket head bolt (Fig. 26) (M5 x 14).
3. Tilt back the top cover (Fig. 27).
4. Remove the filter from inside the top cover (Fig. 28).
5. Remove the dust and rubbish from the filter with
Bostitch cleaner [SB-TC1]. Ensure that the filter is dry
and free from contamination. Replace the filter and
filter cover (Fig. 29).
6. Set the motor lead wire and the spark plug lead
3-4
wire (Fig. 30).
3-4
A) Check that the lead wires are inside the rib.
10-14
30-45
B) Check that the lead wires are not trapped by the
8+
cover.
C) Check the position of the lead wire setting position
7. Check that the filter isn't damaged. If damaged,
replace the filter with a new one (part no. 192103)
making sure none of the leads are trapped (Fig. 31).
8. Replace the top cover, ensuring that none of the
leads are trapped (Fig. 32).
9. Replace the socket head bolt (Fig. 33).
10. Always carry out 5-10 test cycles of the tool on
waste material before using on a finished surface to
expel any cleaning material residue [SB-TC1] (Fig.
34).