Adjust Bluetooth Settings - Caliber RDN 902BTi Manual Del Usuario

RDN 902BTi
Receive call
By default, all incoming calls are received automaticaly.
1. If there is incoming call, [Incoming call...] flashes on the screen.
Speak into the Bluetooth microphone.
2. When conversation ends, touch [
Tip
∙ You can select to receive calls manually by set [Auto answer] to [Off] status.
Switch Phone Call to the Mobile
If you do not want your passenger to hear your incoming call, you can switch the
call to the mobile.
1. During talking, touch [
The voice is transferred from the unit's loudspeaker to the mobile phone.

Adjust Bluetooth Settings

1. In Bluetooth menu,touch [
The option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [Bluetooth]: to turn on or off "Bluetooth" function.
∙ [Auto Connect]: to turn on or off "Auto connect" function.
∙ [Auto Answer]: to turn on or off "Auto answer" function.
∙ [Pairing Code]: to set paring code.
∙ [Phone Book Sync]: to synchronize phone book, touch [
Tip
∙ You can also adjust Bluetooth settings in the "Settings"menu.
BLuETOOTh MODE
Bluetooth mode
](red) to terminate the call.
].
].
] on the sub-menu popped out.