Tabla de contenido
Publicidad
RDN 902BTi
Display System
1. Touch the upper left corner to display main menu.
2. Then select [Settings]. The settings menu is displayed.
If [Settings] is not on the current menu, touch
right bottom of the screen.
Adjust video settings
1. Touch [Video].
2. Touch [
] or [
] to highlight a setting.
3. Touch an option repeatedly to select:
Video settings
Options
Full
Aspect ratio
Normal
Video input
You can select the video input format : Auto/NTSC/PAL/SECAM
Normal
Rear view camera
Mirror
Parking
On/O
Backcar mode
Camera/Radar
DivX registration code
View code for DivX registration.
4. Touch blank area of the screen to close sub-menu or touch
upper left corner of the screen to exit settings menu.
Adjust general Settings
1. Touch [General], if necessary.
2. Touch [
] or [
] to highlight a setting.
3. Touch on the option to display/select an option.
General settings
Options
USA
Asia
Japan
Radio region
Europe
Europe (LW)
OIRT
Dimmer mode
Night/Dark/Normal/Bright
Key colour
You can select the key colour.
On
Beep
O
Black Metallic/Blue Metallic/Red
Wallpaper
Metallic/Green Metallic/Black
Calibration
Calibrate the touch screen.
Load factory
Reset the unit.
4. Touch blank area of the screen to close sub-menu or touch upper left corner of the screen to
exit settings menu.
SETuP
SETUP
Description
For widescreen display
For normal display
When you drive in reverse, the rear view is displayed normally.
When you drive in reverse, the rear view is displayed inmirror image.
When "Parking" is on, if the video disc is played, the screen appears
WARNING information and blank screen.
You can switch the backcar mode to camera/radar.
on the
Description
Select one that matches your location.
You can select the dimmer mode.
Turn on the beep sound. Each time you press a button,
the unit beeps.
Turn o the beep sound.
You can select the preferred wallpaper.
Publicidad
Tabla de contenido
