Caliber RDN 902BTi Manual Del Usuario página 25

RDN 902BTi
Fuse is broken
∙ The Fuse type is incorrect. Replace it with a 15A fuse.
∙ Speaker wire or power wire is grounded.
Check the connections.
About Bluetooth device
Music playback is unavailable on the system even after successful Bluetooth connection.
∙ The device cannot be used with the system to play music.
The audio quality is poor after connection with a Bluetooth-enabled device.
∙ The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle
between the device and the system.
Cannot connect with the system.
∙ The device does not support the profiles required for the system.
∙ The Bluetooth function of the device is not enabled. Refer to the user manual of the device for
how to enable the function.
∙ The system is not in the pairing mode.
∙ The system is already connected with another Bluetooth-enabled device. Disconnect that
device or all other connected devices and then try again.
The paired mobile phone connects and disconnects constantly.
∙ The Bluetooth reception is poor. Move the mobile phone closer to the system or remove any
obstacle between the mobile phone and the system.
∙ Some mobile phones may connect and disconnect constantly when you make or end calls. This
does not indicate any malfunction of the system.
∙ For some mobile phones, the Bluetooth connection may be deactivated automatically as a
power-saving feature. This does not indicate any malfunction of the system.
TROuBLEShOOTING
Troubleshooting