Caliber RDN 902BTi Manual Del Usuario página 21

RDN 902BTi
User-Defined Wallpaper
1. Entry
Select Setting mode on the Source menu, touch [wallpaper] in the General setting, then touch
the downwards button of the listed submenu until you find [user defined], touch it to enter user-
defined wallpaper management.
2. Load picture from SD Card and use it as wallpaper
If you insert the SD Card with pictures after your entry, you may have to wait several seconds
for the SD Card reading. Otherwise you may use it directly.
To Select a picture in SD Card, you should touch "Search SD" button, then the directories and
the files will be listed. If you select a directory and touch "√" button , you will enter the directory.
If you select a picture and touch "√" button, the picture will be loaded into the flash and used as
current wallpaper at the same time.
Touch the button below "√" to go back to view the pictures in flash.
Touch the button to the right of the directory to go back to the upper directory.
3. Use or delete pictures in flash
After the 1st step, you can see the pictures in flash listed out, you can preview them by
selecting one of them, then touch the "√" button to use it as wallpaper.
You can also delete pictures in flash which you are not currently using. Select one and touch
the garbage box button.
OThER MODES
Other modes