Other Modes - Caliber RDN 902BTi Manual Del Usuario

RDN 902BTi

OThER MODES

Other modes
Listen to other devices
You can connect an external audio/video device to the unit.
1. Connect the car audio to the device with the supplied AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [AV-IN1] / [AV-IN2].
4. Operate the connected device(see the instructions manual of the device).
Reset
When the unit hangs up, you can reset it.
Press RESET button with a ball-point pen or similar tool.
Reset
Tip
When the unit is reset, all the settings remain unchanged.
Remove the unit
To remove the unit from the dashboard.
1. Take off the trim plate.
2. Screw off the four screws on the left/right side of the unit.
3. Pull the unit out from the dashboard.
Replace fuse
If there is no power, the fuse may be damaged and need to be replaced.
1. Take out the unit from dashboard.
2. Check the electric connection.
3. Buy a fuse that matches the amp rating of the damaged fuse.
4. Replace the fuse.
GPS
1. Press [NAVI] button on the front panel or select [Navigation] on the main source menu, the
navigation menu will display in a few seconds.
2. Refering to the map manual to operate the navigation system.