Detaching The Viewfinder; Adjusting The Position; Adjusting The Angle - Sony CBK-VF02 Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
2
Couple the viewfinder connector to the
VF connector (rectangular) on the
camera.
s
VF connector (rectangular)
Note
Connect with the label "UPPER" facing up.

Detaching the viewfinder

You can detach the viewfinder by following the
attaching procedure in reverse order, but there is
an additional action to take: when detaching the
viewfinder from the fitting shoe, pull up the
stopper. (See the illustration in step 1.)

Adjusting the Position

To adjust the viewfinder left-to-right position,
loosen the left-to-right positioning ring on the
camera, and to adjust the front-to-back position,
loosen the front-to-back positioning knob on the
camera.
20
Attaching the Viewfinder to a Camera
Viewfinder left-to-right positioning ring
Viewfinder front-to-back positioning knob

Adjusting the Angle

You can adjust the angle of the viewfinder.
Reversing the display (image/text
indication) vertically
The viewfinder can be rotated as much as 180
degrees toward the direction facing the subject.
When you do this, the picture and other
information displayed in the screen appear upside
down. To restore the normal display, set the
MIRROR switch to B/T.

Publicidad

Tabla de contenido
loading

Tabla de contenido