SPORTSTECH X-BIKE X100-B Manual Del Usuario página 26

STEP 7
Insert the console frame into the
bike main fram as pictured on the left.
Tight the handle bar (1) to the
main frame (19) with two bolts (10)
and two flat washers(11).
and connect with wire:sensor A (9)to
sensor B(18).
STEP 8
The pedals (6)&(7) are marked
"L" and "R" - Left and Right.
Connect them to their appropriate crank arms.
The right crank arm is on the right hand side
of the cycle as you sit on it.
Note that the Right pedal should be threaded on
clockwise and the Left pedal anti-clockwise.
1
10
11
15
20
6
4
9
10
11
18
19
7