CAEDEN 10 Serie Guia Del Usuario página 5

Pairing Your Linea No10
Pairing Your Linea No10
Pairing Your Linea Nº 10
Linea Nº10
Linea Nº10
Linea Nº1
Linea Nº1
Linea Nº2
Linea Nº2
Hold 2 seconds
for pairing mode.
The Linea No10 can store up to 8 Bluetooth
The Linea No10 can store up to 8 Bluetooth
The Linea Nº 10 can remember up to 8
hosts at one time.
hosts at one time.
previously connected devices at one time.
1. To power on and pair your headphones for the
1. To power on and pair your headphones for the
1. To power on and pair the headphones for
rst time, press and hold the button for
rst time, press and hold the CENTER button for
CENTER
the first time press and hold the
center
2 seconds. The will ash alternately
2 seconds. The will ash alternately
LED RED
button for 2 seconds. The LED will flash alter- RED
led
and to indicate that the headset is in
and BLUE to indicate that the headset is in
nately BLUE and to indicate the headset
red Blue
pairing mode.
pairing mode.
is in pairing mode.
2. Open the Bluetooth settings on your
2. Open the Bluetooth ® settings on your
®
2. Open the Bluetooth ® settings on your
smartphone, tablet, computer or other mobile
smartphone, tablet, computer or other mobile
smartphone, tablet, computer or other mobile
device. Follow your device's pairing instructions
device. Follow your device's pairing instructions
device. Follow your device's pairing instruc-
and select the device named "Linea No10."
and select the device named "Linea No10."
tions and select the device named Linea Nº10.
3. The will blink twice to indicate that
3. The LED will blink BLUE twice to indicate that
LED BLUE
3. The LED will blink blue twice to
the Linea No10 is paired with your device.
the Linea No10 is paired with your device.
indicate that the Linea Nº10 is paired
with your device.
®
®
Hold 6 seconds to pair
with another device.
4. To pair your Linea No10 with another device,
4. To pair your Linea No10 with another device,
4. To pair your Linea Nº10 with another
start with the headset in power mode. Hold
start with the headset in power OFF mode. Hold
OFF
device, start with the headset in power off
the button for 6 seconds. The
the CENTER button for 6 seconds. The LED
CENTER LED
mode. Hold the center button for 6 seconds.
ash alternating and to indicate that it
ash alternating and to indicate that it
RED BLUE
RED BLUE
The will flash alternating red and blue
led
is ready to pair.
is ready to pair.
to indicate that it is ready to pair.
Note: When more than 8 hosts are paired, the oldest paired
Note: When more than 8 hosts are paired, the oldest paired
Note: When more than 8 devices are paired, the oldest
device will be automatically dropped when a new device is
device will be automatically dropped when a new device is
paired device will be automatically dropped when a new
paired. You may completely clear the list of stored devices by paired. You may completely clear the list of stored devices by
device is paired. You may completely clear the list of stored
pressing & , while the power is on,
pressing & , while the power is on,
VOLUME UP VOLUME DOWN
VOLUME UP VOLUME DOWN
devices by pressing VOLUME UP and VOLUME DOWN
until the ashes & twice.
until the ashes & twice.
LED RED BLUE
LED RED BLUE
buttons at the same time, while the power is on, until the
flashes and twice.
LED RED BLUE
The Linea Nº10 is:
in pairing mode.
The Linea No10 is:
The Linea No10 is:
paired with your device.
in pairing mode.
in pairing mode.
paired with your device. paired with your device.
× 2
× 2
will
will