CAEDEN 10 Serie Guia Del Usuario página 62

Pairing Your Linea No10 Pairing Your Linea No10
为 Linea Nº10 配对
Linea Nº10 Linea Nº10
Linea Nº 1 Linea Nº 1
Linea Nº2 Linea Nº2
按住 2 秒钟进
入配对模式。
The Linea No10 can store up to 8 Bluetooth The Linea No10 can store up to 8 Bluetooth
º
一次可以记住最多 8 个以
Linea N 10
hosts at one time. hosts at one time.
前曾经连接过的设备。
1. To power on and pair your headphones for the 1. To power on and pair your headphones for the
1. 要首次打开耳机电源并进行配对，请
rst time, press and hold the rst time, press and hold the button for button for
CENTER CENTER
按住"中央"按钮 2 秒钟。 LED 将交
2 seconds. The 2 seconds. The will ash alternately will ash alternately
LED LED RED RED
替闪烁红色和蓝色，表示耳机处于配对
and and to indicate that the headset is in to indicate that the headset is in
BLUE BLUE
模式。
pairing mode. pairing mode.
2. 打开智能手机、平板电脑、计算机或
2. Open the Bluetooth 2. Open the Bluetooth settings on your settings on your
® ®
其他移动设备上的蓝牙 ® 设置。按照设
smartphone, tablet, computer or other mobile smartphone, tablet, computer or other mobile
备的配对说明操作并选择名为" Linea
device. Follow your device's pairing instructions device. Follow your device's pairing instructions
º
and select the device named "Linea No10." and select the device named "Linea No10." N 10 "的设备。
3. The 3. The will blink will blink twice to indicate that twice to indicate that
LED LED BLUE BLUE
将闪烁蓝色两次，表示 Linea
3. LED
the Linea No10 is paired with your device. the Linea No10 is paired with your device.
º
N 10 已与您的设备配对。
® ®
按住
一个设备配对。
4. To pair your Linea No10 with another device, 4. To pair your Linea No10 with another device,
º
要将 Linea N
4. 10
start with the headset in power start with the headset in power
对，请从电源关闭的耳机开始。按住
the the button for 6 seconds. The button for 6 seconds. The
CENTER CENTER
"中央"按钮 6 秒钟。 LED 将交替闪
ash alternating ash alternating
RED RED
烁红色和蓝色，表示耳机已准备好进
is ready to is ready to pair. pair.
行配对。
Note: When more than 8 hosts are paired, the oldest paired Note: When more than 8 hosts are paired, the oldest paired
device will be automatically dropped when a new device is device will be automatically dropped when a new device is
paired. You may completely clear the list of stored devices by paired. You may completely clear the list of stored devices by 注意：当配对 8 个以上的设备时，配对新设备时将自动
pressing pressing & &
VOLUME UP VOLUME UP VOLUME DOWN VOLUME DOWN
丢弃最早配对的设备。通过在电源打开时同时按"音量调
6 秒钟与另
until the until the ashes ashes & &
LED LED RED RED
高"和"音量调低"按钮，直到 LED 闪烁红色和蓝色两
次，可以完全清除存储设备列表。
º
Linea N 10：
处于配对模式
The Linea No10 is: The Linea No10 is:
已与设备配对
in pairing mode. in pairing mode.
paired with your device. paired with your device.
× 2 × 2
与另一个设备配
mode. Hold mode. Hold
OFF OFF
will will
LED LED
and and to indicate that it to indicate that it
BLUE BLUE
, while the power is on, , while the power is on,
twice. twice.
BLUE BLUE