Troubleshooting Guide - BH FITNESS G-246 Manual De Instrucciones

TROUBLESHOOTING GUIDE

Problem: The display comes on but only the
Time function works
Solution:
a.- Make sure that the connection cable is
connected.
Problem: Display segments of a function read-
out are not visible or error messages for a
particular function appear.
Solution:
a.- Unplug it from the 220 V mains socket for 15
seconds and then plug it back in.
b.- If the above steps do not help then replace
the electronic monitor.
9V Transformer
Problem: The monitor does not switch on.
Solution:
a.- Check the 220 V mains connection
b.- Check the output connection from the
transformer to the machine.
c.- Check the cable connections for the main
post.
Avoid leaving the electronic monitor in direct
sunlight as this might damage the liquid crystal
display. Similarly, do not expose it to water or
knocks.
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS
WITHOUT PRIOR NOTICE
10
OF ITS PRODUCTS