Troubleshooting Guide; Error Codes - BH FITNESS H8702 Manual De Instrucciones

If the error code «E2» appears on the
screen, this means that you have
stopped exercising.

TROUBLESHOOTING GUIDE

Problem: The display comes on but
only the Time function works
Solution:
a.- Make sure that the connection
cable is connected.
Problem: The display does not come
on or the displayed segments are very
weak
Solution:
a.- Make sure that the adapter is
plugged into the mains socket and the
jack is inserted correctly into the
machine.
b.- Check that there is voltage on the
mains socket
Problem: Display segments of a
function read-out are not visible or
error messages
function appear.
Solution:
a.- Unplug the adapter from the mains
socket and plug it back in again.
b.- Make sure that the connection
terminals on the joint with the main
post to the body and with the monitor
are connected correctly.
c.- If the above steps do not help then
replace the electronic monitor.
Avoid leaving the electronic monitor in
direct sunlight as this might damage
for a particular
the liquid crystal display. Similarly, do
not expose it to water or knocks.

ERROR CODES

Problem: E1 appears on the display
Solution:
Check that the pulse sensors are
connected.
Problem: E2 appears on the display.
Solution:
You have stopped exercising before
the 1 minute RECOVERY test has
finished.
Problem: E3 appears on the display
Solution:
Check all
connections to the monitor.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
Do not hesitate to get touch with us if
you have any queries, by calling:
+44 0844 335 3988
service@bh-uk.co.uk
10
of the Hand-Grip