Troubleshooting Guide - BH FITNESS H6975 Manual De Instrucciones

The test will not work if the sensor is
not positioned correctly or if the letter
"P" is shown on the screen.

TROUBLESHOOTING GUIDE

Problem: The display comes on but
only the Time function works.
Solution:
a.- Make sure that the connection
cable is connected.
Problem: Display segments of a
function read-out are not visible or
error messages
function appear.
Solution:
a.- Finish the exercise or unplug it
from the 220 V mains socket for 15
seconds and then plug it back in.
b.- If the above steps do not help then
replace the electronic monitor.
for a particular
Problem: The monitor does not switch
on.
Solution:
a.- Check the 220 V mains connection
b.- Check the output connection from
the transformer to the machine.
Transformer 9V. 0.5 Amp.
c.- Check the cable connections for
the main post.
Avoid leaving the electronic monitor in
direct sunlight as this might damage
the liquid crystal display. Similarly, do
not expose it to water or knocks.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
Do not hesitate to get touch with us if
you have any queries, by calling:
+44 0844 335 3988
service@bh-uk.co.uk
12