Copying The Settings Of A Component Select Button To Another Button - Sony RM-VL1400T Manual De Instrucciones

Copying the settings of a
COMPONENT select button
to another button
You can copy the entire settings of a COMPONENT
select button or Label select button to another
COMPONENT select button or Label select button.
Notes
• You cannot copy the settings to a COMPONENT select button
or Label select button on which any "learned" function (page
12) or Component Macro (page 18) has been programmed or
A/V component's name or label has been changed. (A beep
sounds five times and "NG" appears on the screen.)
• Characters displayed when using the button will be also
replaced.
Example: To copy the settings on the
TV button to the MD button
1
While pressing the
the OTHER button.
"SET MODE" appears as the screen title.
2
Press the V/v buttons to select "6
UTILITY", then press the OK button or
the centre Label select button.
"UTILITY" appears as the screen title.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
3
Press the V/v buttons to select "2 COPY",
then press the OK button or centre Label
select button.
"COPY" appears as the screen title.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
22 GB
(light) button, press
4
Press the TV button.
"TV" appears in the second line of the screen.
5
Press the OTHER button repeatedly, then
press the centre Label select button (MD).
A beep sounds and "TV >> MD" appears in the
second line of the screen.
6
Press the (light) button or the RETURN
button three times.
The set mode closes, and the Remote Commander
returns to standby for operating the A/V components.
To reset the settings
Follow the procedure in "Resetting a COMPONENT select
button or Label select button" on page 28.