Basic Operations; Setting Operations Of A/V Components - Sony RM-VL1400T Manual De Instrucciones

Basic Operations

Setting operations of A/V components

—Setting component code
The Remote Commander is preset at the factory to operate Sony brand A/V components. (Refer to the table below.)
If you are using the Remote Commander with factory-set Sony components, skip the following procedures.
To use with other brand A/V components, or Sony A/V components which do not function with the Remote
Commander, you need to follow the procedures to set the component code.
Factory preset
COMPONENT select buttons
TV
VCR
SAT
DVD
Label select button-left
Label select button-centre
Label select button-right
Label select button-left
Label select button-centre
Label select button-right
1
Refer to the tables in the supplied "Preset
Code List" to find the four-digit preset
code for the desired A/V component.
If more than one code number is listed, use the
number that is listed first. For example, to set up a
Panasonic TV, you would use the code number 8095.
2
While pressing the
the OTHER button.
"SET MODE" appears as the screen title.
Screen title Preset A/V components
TV Sony TV (Analogue)
VCR Sony VCR (Video Cassette Recorder)
SAT Sony Analogue Satellite Receiver
DVD Sony DVD player
CABLE Analogue Cable box
DVD-R Sony DVD Recorder
AMP Sony Receiver/Amplifier
CD Sony CD player
MD Sony MD deck
TAPE Sony Cassette deck
(light) button, press
3
Press the V/v buttons to select
"1 PRESET", then press the OK button or
the centre Label select button.
"PRESET" appears as the screen title.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
4
Press the COMPONENT select button for
the desired A/V component.
The selected A/V component's label and the preset
code currently set appear on the screen.
Tips
• To set A/V components which are not specified on the
COMPONENT select buttons, press the OTHER button
repeatedly, then press the Label select button
corresponding to the desired A/V component.
• You can set components to the COMPONENT select buttons
or Label select buttons than those that are specified on each
other button or on the screen. Note however, that the TV
button can only be set a TV, and the Label select button (to
which an amplifier is set at the factory preset) can only be
set an amplifier or DVD player home theatre system.
GB
7
Continued