Sony RM-VL1400T Manual De Instrucciones página 25

9
Press the V/v buttons to select "3 FADE
EFFECT", then press the OK button.
"FADE EFFECT" appears as the screen title, and the
current setting is shown inside the [ ].
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
10
Press the B/b buttons or the left or right
Label select button.
Each time the setting changes, a beep sounds and [ ]
moves to the new setting.
ON: fade in/out the button illumination
OFF: normal button illumination
11
Press the (light) button, the centre
Label select button, the OK button, or the
RETURN button.
"UNIT SETTINGS" appears as the screen title.
12
Press the V/v buttons to select "4 LIGHT
ON MODE", then press the OK button or
the centre Label select button.
"LIGHT ON MODE" appears as the screen title, and
the current setting is shown inside the [ ].
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
13
Press the B/b buttons or the left or right
Label select button.
Each time the setting changes, a beep sounds and [ ]
moves to the new setting.
ALL: The button illumination is activated by
pressing any button on the Remote Commander
except the 2 +/– and PROGRAM +/– buttons.
LIGHT: The button illumination is activated by
pressing the (light) button only.
14
Press the (light) button or the RETURN
button three times.
The set mode closes, and the Remote Commander
returns to standby for operating the A/V components.
25 GB