Additional Information
Precautions
• Do not drop the unit or give a shock to the unit, or it
may cause a malfunction.
• Do not leave the unit in a location near heat sources, or
in a place subject to direct sunlight, excessive dust or
sand, moisture, rain or mechanical shock.
• Do not put foreign objects into the unit. Should any
liquid or solid object fall into the unit, have it checked
by qualified personnel before operating the unit any
further.
• Do not expose the remote control detectors of your
components to direct sunlight or other strong
illumination. Too much light there can interfere with
remote control operations.
• Be sure to place the Remote Commander out of the
reach of small children or pets. Components such as air
conditioners, heaters, electric appliances, and electric
shutters or curtains receiving an infrared signal can be
dangerous if misused.
Maintenance
Clean the surface with a soft cloth slightly moistened
with water or a mild detergent solution. Do not use any
type of solvent such as alcohol, benzine or thinner as
they may damage the finish of the surface.
GB
30
Specifications
Operating distance
Approx. 10 meters (32.8 ft.) (varies depending on
components of different manufacturers)
Power requirements
Two LR6 (size AA) alkaline batteries (not supplied)
Battery life
Approx. 5 months
• When using alkaline batteries.
• When turing on or off a Sony TV for approx. 300 times
per day using alkaline batteries.
• When adjusting the button illumination setting to
Brightness: 5 and Light on time: 10 seconds, and
adjusting the Display setting to Brightness: Level 1 and
Display on time: 30 seconds.
Dimensions
Approx. 60.4 × 227.5 × 29.4 mm
(w × h × d) (2
× 9 × 1
1
/
2
Mass
170 g (6 oz.) (not including batteries)
Learnable signals *
Capacity per signal: up to 300 bits
Signal frequency range: 455 kHz and up to 300 kHz
Signal interval: up to 1 second
* Some signals cannot be learned by the Remote Commander,
even though the signals comply with these specifications.
Design and specifications are subject to change without
notice.
The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the
countries EEA (European Economic Area).
3
/
in.)
16