Description; Phisical Description; Technical Description - Ultradent Products Genius Manual Del Usuario

If you have any questions, please contact a certified dealer or customer service:
www.ultradent.com
Toll-free (US): 1.888.230.1420
Local (US): 801.572.4200
Fax (US): 801.553.4600
onlineordersupport@ultradent.com
III - DESCRIPTION

3.1 PHISICAL DESCRIPTION

• Electronic unit with motor mount
• Control pedal
• Power supply
The endodontic motor and its cord are not shown.

3.2 TECHNICAL DESCRIPTION

a. LCD screen/control pad
The Genius endodontic motor is controlled by applying moderate pressure to the keypad.
®
1- The "MODE" button allows the operator to switch easily between forward-reverse movement and rotary movement.
The screen display varies accordingly. (Fig. 2 – 1)
2- + and - buttons are used to scroll through the programs (from 1 to 10). (Fig. 2 – 2)
3- Calib. automatically calibrates the contra-angle and endodontic motor. (Fig. 2 – 3)
4- Ratio sets contra-angle's reduction ratio. (1:1 - 6:1 – 8:1 - 16:1 - 20: 1- 32:1). (Fig. 2 – 4)
5- RPM followed by +/- buttons: Sets the motor rotation speed (in revolutions/minute). (Fig. 2 – 5), (Fig 2-2)
6- Ncm followed by +/- buttons: Sets motor torque (in Ncm). (Fig. 2 – 6), (Fig. 2 - 2)
7- FWD/REV: Sets clockwise or counterclockwise rotation. (Fig. 2 – 7)
8- AR MODE: Sets the back rotation type: Stop STP, Auto Reverse AR, or Special Auto Reverse SAR. (Fig. 2 – 8)
9- FWD° followed by +/- buttons: selects of a forward rotation angle, between 10 and 360°. (Fig. 2 – 9), (Fig. 2 - 2)
10- REV° followed by +/- buttons: selects of a reverse rotation angle, between 10 and 360°. (Fig. 2 – 10), (Fig. 2 - 2)
11- Control pedal connector. (Fig. 2 – 11)
12- Endodontic motor connector. (Fig. 2 – 12)
Relevant information for the operator are displayed on the LCD screen.
b. Control box rear panel
1- Power switch (Fig. 3 – 1)
2- Power connector (Fig. 3 – 2)
c. Control pedal
Activates the maximum speed selected or starts forward-reverse movement.
d. Technical specifications
Unit/endodontic motor/pedal
Manufacturer Satelec, a company of Acteon Group
Dimensions
170 x 72 x 130 mm
(L x H x D)
Materials ASA
Endodontic motor 10,000 rpm / Torque: 6.8 mNm
Noise < 65 dBA
Power adaptor
Manufacturer Bridge Power Corp
Model MENB 1030A0974C01
Input voltage 100 – 240 VAC
Input current 1A MAX
Do not use near flammable anesthetics or oxygen.
Conditions for use: Temp +18°C/+40°C (+64°F/+140°F) RH < 80%. Altitude limit: 2,000 meters (6,500 feet).
Conditions for device shipping and storage: Temp +5°C/+65°C (+41°F/+149°F) RH < 20-95% without condensation.
Conditions for endodontic motor shipping and storage: Temp -20°C/+70°C (-4°F/+158°F) <10-100 % without condensation.
Life of the device: Under the recommended conditions of use: 5 years. No warranty claims will be accepted if a failure occurs
during or after this time due to variations in frequency of use and in sterilization and maintenance conditions.
Operating Manual ● Genius
®
Protection
Type
DM class
Input voltage
Input current
Output voltage
Output current
Class
Endodontic Motor ● J28629 ● V4 ● (16) ● 10/2016 ● NO69US010F
Class II
B
IIa as per Directive 93/42/EEC Appendix IX rule 9
9 VDC
2.5 A
9 VDC
3 A
II
5