Accu-Chek Performa Nano Instrucciones De Uso página 19

Here is how to mark a test result and initiate a post-meal test reminder:
1. Perform a blood glucose test. The blood glucose result appears on the display.
2. Leave the test strip in the meter. Press and release
post-meal test reminder.
Pre‑Meal Marker
Pre‑Meal Marker with Post‑Meal Test Reminder
Post‑Meal Marker
General Marker
3. When the test result marker ( , , or
you wish to select appears on the display, remove and discard the used test strip.
• If you select the post-meal test reminder, the meter beeps 1 or 2 hours after the pre-meal test to
remind you to do a post-meal test.
• If you select a test result marker, it is automatically stored in memory.
NOTE
The post-meal marker automatically appears with the test result if a test is
performed 15 minutes before or after the post-meal test reminder is programmed
to beep. Set the post-meal test reminder time to 1 or 2 hours in the set-up mode.
to toggle through the test result markers and
) or pre-meal marker with post-meal test reminder (
17
) that