Mettler Toledo IND310drive Manual De Instalación página 29

IND310drive Main PCB
J15 Pin
Pin 6 (+12V)
Pin 4 (+20mA)
Pin 5 (-20mA)
Pin 3 (Ground)
IND310drive Main PCB
J15 Pin
Pin 6 (+12V)
Pin 4 (+20mA)
Pin 5 (-20mA)
Pin 3 (Ground)
Figure 2-11: Connecting the Current Loop to Passive and Active Peripherals
Ethernet
The Ethernet connection is used in the same way as the COM 1 and COM 2
connectors. See Figure 2-10 for the location of the RJ45 Ethernet connector.
USB
A standard computer keyboard can be connected to the terminal via the USB port
located on the main board. See Figure 2-9 for the location of the connector.
IND310drive Installation Manual
Passive Peripheral
+20mA
−20mA
Connect these two pins on J15
Active Peripheral
+20mA
−20mA
2-11