Display And Keyboard - Mettler Toledo IND310drive Manual De Instalación

IND310drive Installation Manual
Communication ports (COM1 and COM2) are RS 232/20 mA CL and RS 485/422
compatible. Both serial ports are available simultaneously for transmitting;
however, only one can receive data at any given time. A USB and an Ethernet port
are also available. Connections to the controller PCB are made using removable
terminal strips with wire sizes ranging from 24 to 16 AWG.

Display and Keyboard

The IND310drive terminal has an LCD display (see Figure 1-) that shows the
terminal's status, including the active scale, date, and time across the top, the
current application in the middle, and enabled softkey functions across the bottom.
Application keys
The terminal includes five softkeys and four application keys, each measuring
19.05 mm (0.75 in.) high. Four scale function keys, each measuring 12.7 mm
(0.5 in.) are positioned to the right-side of the display.
The terminal's 12-key numeric keypad is used to enter data and commands.
Numeric keys each measure 12.7 mm (0.5 in.), and are located on the
upper-right side of the terminal front panel.
Five navigational keys are located below the numeric keypad. These keys enable
the operator to navigate through setup options in the menu tree and within setup
and application screens.
1-8
LCD display
Softkeys
Scale Function
Keys
Figure 1-4: Front Panel
Numeric keypad
Navigational
keys