Environmental Protection; Hazardous Areas; Inspection And Contents Checklist; Model Identification - Mettler Toledo IND310drive Manual De Instalación

Environmental Protection

The IND310drive desk/wall model meets IP69K requirements.

Hazardous Areas

The IND310drive is not intrinsically safe and must not be operated in areas
classified as Hazardous by the National Electrical Code (NEC) because of the
combustible or explosive atmospheres in those areas. Contact an authorized
METTLER TOLEDO representative for information about hazardous applications.

Inspection and Contents Checklist

Verify the contents and inspect the package immediately upon delivery. If the
shipping container is damaged, check for internal damage and file a freight claim
with the carrier if necessary. If the container is not damaged, remove the
IND310drive terminal from its protective package, noting how it was packed, and
inspect each component for damage.
If shipping the terminal is required, it is best to use the original shipping container.
The IND310drive terminal must be packed correctly to ensure its safe
transportation.
The package should include:
IND310drive terminal
•
Documentation CD
•
• User's Guide
• Technical manual
• Installation manual

Model Identification

Please refer to Table 1-1, Model Identification, to identify the IND310drive that was
ordered. The IND310drive model number is located on the back of the terminal
along with the serial number.
WARNING!
THE IND310drive TERMINAL IS NOT INTRINSICALLY SAFE! DO NOT USE
WITHIN AREAS CLASSIFIED AS HAZARDOUS DIVISION 1 OR ZONE 0/1
BECAUSE OF COMBUSTIBLE OR EXPLOSIVE ATMOSPHERES.
IND310drive Installation Manual
1-3