To Install A Cutting Blade - Husqvarna FS 4600 G II Manual De Usuario

3. Turn the locking knob clockwise to lock the operation
handle in position.
4. Do the same procedure on the other operation
handle.

To install a cutting blade

3-speed gearbox on page 17 before
Read the section
you install a cutting blade.
CAUTION:
cutting blade if it is installed opposite the
direction of rotation. Make sure that the
cutting blade rotates in the direction of the
arrows shown on the cutting blade.
1. Turn the ignition key to the "I" position (A).
2. Push the lever for cutting depth adjustment rearward
to lift the product.
3. Turn the ignition key to the "0" position (B).
1657 - 001 - 08.09.2021
Risk of damage to the
A
B
4. Push the machine stop button.
5. Close the water valve.
6. Loosen the front bolt on the blade guard and lift the
blade guard latch (C).
C
7. Lift the blade guard front (D).
D
15