Maintenance And Inspection - Brother DB-2610 Manual De Instrucciones

All manuals and user guides at all-guides.com
•
This sewing machine should only be used by
operators who have received the necessary
training in safe use beforehand.
•
The sewing machine should not be used for any
applications other than sewing.
•
Turn off the power switch at the following times,
otherwise the machine may operate if the
treadle is depressed by mistake, which could
result in injury.
•
When threading
•
When replacing the needle
•
When not using the machine and when leav-
ing the machine unattended
•
If using a work table which has casters, the cast-
ers should be secured in such a way so that they
cannot move.
•
Turn off the power switch before carrying out
cleaning, otherwise the machine may operate if
the treadle is pressed by mistake, which could
result in injury.
* When using a clutch motor, the motor will
keep turning even after the power is switched
off as a result of the motor's inertia. Wait until
the motor stops fully before starting work.
•
If using a work table which has casters, the cast-
ers should be secured in such a way so that they
cannot move.

Maintenance and inspection

•
Maintenance and inspection of the sewing ma-
chine should only be carried out by a qualified
technician.
•
Ask your Brother dealer or a qualified electri-
cian to carry out any maintenance and inspec-
tion of the electrical system.
•
Turn off the power switch and disconnect the
power cord from the wall outlet at the following
times, otherwise the machine may operate if the
treadle is depressed by mistake, which could
result in injury.
•
When carrying out inspection, adjustment and
maintenance
•
When replacing consumable parts such as the
loopers and knife.
* When using a clutch motor, the motor will
keep turning even after the power is switched
off as a result of the motor's inertia. Wait until
the motor stops fully before starting work.
CAUTION
Sewing
•
Attach all safety devices before using the sew-
ing machine. If the machine is used without
these devices attached, injury may result.
•
Do not touch any of the moving parts or press
any objects against the machine while sewing,
as this may result in personal injury or damage
to the machine.
•
If an error occurs in machine operation, or if ab-
normal noises or smells are noticed, immedi-
ately turn off the power switch. Then contact
your nearest Brother dealer or a qualified tech-
nician.
•
If the machine develops a problem, contact your
nearest Brother dealer or a qualified technician.
Cleaning
•
Be sure to wear protective goggles and gloves
when handling the lubricating oil, so that no oil
gets into your eyes or onto your skin, otherwise
inflammation can result.
Furthermore, do not drink the oil under any cir-
cumstances, as they can cause vomiting and di-
arrhoea.
Keep the oil out of the reach of children.
•
If using a work table which has casters, the cast-
ers should be secured in such a way so that they
cannot move.
•
If the power switch needs to be left on when
carrying out some adjustment, be extremely
careful to observe all safety precautions.
•
Use only the proper replacement parts as speci-
fied by Brother.
•
If any safety devices have been removed, be ab-
solutely sure to re-install them to their original
positions and check that they operate correctly
before using the machine.
•
Any problems in machine operation which re-
sult from unauthorized modifications to the ma-
chine will not be covered by the warranty.
– ii – DB-2610 (English)