Sony MPK-DVF6 Manual De Instrucciones página 10

Preparations (continued)
For DCR-TRV118E/TRV116E/TRV27/TRV27E/TRV25/TRV25E/
TRV24E/TRV18/TRV18E/TRV16/TRV16E
Use camera mounting shoe B and E,
spacer C, and the screw plate.
1 Attach the spacer C to shoe E.
2 Fasten the screw of the screw
3 Attach the screw plate to
4 Fasten the screw of the screw
5 Connect the A/V connecting
Now you are ready to install the camcorder to the marine pack.
Be sure to check that the camera mounting shoe is attached to the camcorder
tightly before you install the camcorder to the marine pack.
10
-GB
Attach the screw plate to
position 2 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
position 2 on shoe B.
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
cable of the shoe to the
camcorder's AUDIO/VIDEO
jack.
Installation
position
of the screw plate
on the camera
3
mounting shoe B
Spacer C
Screw plate
Camera mounting
shoe E
Camera mounting
shoe B
Screw plate