Siemens sitrans LG200 Manual Del Usuario página 5

Approvals
The device nameplate lists the approvals that apply to your device.
Note:
• General Purpose
• Intrinsically Safe
•
•
• Explosion Proof/
Flame Proof
•
•
•
• Non-Incendive
•
• Non-sparking
•
• Others
•
Pressure Application
WARNINGS:
• Do not attempt to loosen, remove, or disassemble process connection or
instrument housing while vessel contents are under pressure.
• Improper installation may result in loss of process pressure.
7ML19985XG81
CSA/FM, CE, C-TICK
FM Class I, Div. 1, Groups A, B, C, D, Class II, Div. 1, Groups
E, F, G T4, Class III, Type 4, IP65
CSA Class I, Div. 1, Groups A, B, C, D, Class II, Div. 1,
Groups E, F, G T4, Class III, Type 4, IP65
ATEX II 1G EEx ia IIC T4
FM Class I, Div 1, Groups B, C, D, Class II, Div. 1,
Groups E, F, G T4, Class III, Type 4, IP65
CSA Class I, Div. 1, Groups B, C, D, Class II, Div. 1, Groups
E, F, G T4, Class III, Type 4, IP65
ATEX II 1/2 G EEx d [ia] IIC T6
ATEX II 1/2 D IP65 T85 °C
FM Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2, Groups
F, G T4, Class III, Type 4, IP65
CSA Class I, Div. 2, Groups A, B, C, D, Class II, Div. 2,
Groups E, F, G T4, Class III, Type 4, IP65
ATEX II 3G EEx nA [nL] IIC T4 to T6
ATEX II 3G EEx nA II T4 to T6
Functional Safety to SIL 1 in accordance with IEC 61508
Safe Failure Fraction (SFF) of 85.5% (Third party FMEDA
Analysis - hardware only)
Functional Safety to SIL 2 in accordance with IEC 61508
Safe Failure Fraction (SFF) of 91% (Third party FMEDA
Analysis - hardware only)
SITRANS LG200 – QUICK START MANUAL Page EN-3