Ambient/Operating Temperature - Siemens sitrans LG200 Manual Del Usuario

SITRANS LG200
WARNING: Changes or modifications not expressly approved by Siemens
could void the user's authority to operate the equipment.
Notes:
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
• SITRANS LG200 is to be used only in the manner outlined in this manual, otherwise
protection provided by the equipment may be impaired.]
• This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based communications.
SITRANS LG200 is a guided wave radar transmitter for short and medium range level, level/
interface and volume measurement of liquids and solids. It is unaffected by changes in process
conditions, high temperatures and pressures, and steam.
SITRANS LG200 supports HART
Specifications
For a complete listing, see the SITRANS LG200 Instruction Manual.

Ambient/Operating Temperature

• Ambient temperature: -40 to +80 °C (-40 to +175 °F)
• Max. process temperature and pressure: Probe type and pressure dependent; see
process device tag for details
Power
General Purpose:
Intrinsically Safe:
Explosion Proof:
1.
HART®is a registered trademark of the HART Communication Foundation.
Page EN-2
1
communication protocol, and SIMATIC PDM software.
11 to 36 V DC
SITRANS LG200 – QUICK START MANUAL 7ML19985XG81