Guide; Removing The Mowing Deck; Removing The Discharge Chute - Viking MR 4082 Manual De Instrucciones

● Drive slopes in a longitudinal direction.
Driving transversely increases the
danger of tipping over – note the
maximum slope inclination. (
● Avoid changes of direction on slopes –
if changes of direction cannot be
avoided, they must be executed with
particular care.

12.13 Guide

Note
The accuracy of the guide depends
on the body size of the user and on
the adjustment of the driver's seat.
In order to prevent uncut grass being left
between several mowing strips, the
machine is equipped with a guide.
● The user sits on the driver seat.
When the guide (1) is positioned precisely
at the mowing edge (transition from
already mown lawn to unmown lawn) as
88
seen from the driver's seat, the lawn is cut
with an overlap (A) of approx. 5 cm.
This overlap ensures that the mowing
4.7) blades cut approx. 5 cm into the already
cut mowing strip. This ensures that no
uncut grass is left between the two mowing
strips.
13. Mowing deck
Overview of mowing deck components
in installed condition
1 Mowing deck
2 V-belt
3 Cotter pin
4 Retaining pin
5 V-belt tensioner lever
6 V-belt pulley
7 Front mowing deck mounting
8 Rear mowing deck mounting

13.1 Removing the mowing deck

Risk of injury!
Prior to all operations on the
mowing deck, carefully read and
observe the section "For your
safety". ( 4.)
Avoid damage to the machine!
When the mowing deck is removed,
the ride-on mower must not be
operated with the discharge chute
installed.
Remove the discharge chute so
that it cannot catch on objects
(molehills, roots, etc.) and become
damaged. ( 14.5)
● Park the machine on level and solid
ground.
● Stop the engine. ( 12.3)
● Remove the ignition key.
● Engage the parking brake. (
● Remove the grass catcher box.
( 12.10)
● Remove the discharge chute. (
Removing the rear V-belt cover
Danger of burns:
Allow the machine, particularly the
exhaust system, to cool down
completely before removing the
rear V-belt cover.
● Select the lowest cutting level.
0478 193 9902 A - EN
8.10)
14.5)