Viking MR 4082 Manual De Instrucciones página 93

Swivel front mowing deck mounting (7)
downwards and attach it to the mowing
deck (1).
Push the mowing deck (1) slightly to the
rear, attaching the front mowing deck
mounting (7) to the mowing deck.
Attaching the mowing deck at the rear
Note
Before attaching, check that the
mowing deck is correctly attached
at the front mowing deck mounting.
● Raise mowing deck (1) with one hand
and hold. The bores of the mounting on
the mowing deck must be aligned with
those of the mowing deck mounting on
the machine.
Note
To facilitate installation, note and
carefully observe the specified
sequence.
0478 193 9902 A - EN
Step 1:
Push the retaining pin (4) through the
bores of the mounting on the mowing deck
(9) and those of the mowing deck
mounting (8) to the stop.
Step 2:
Insert cotter pin (3) through the bore in the
retaining pin (4).
Step 3:
Push the retaining pin (4) through the
bores of the mounting on the mowing deck
(9) and those of the mowing deck
mounting (8) to the stop.
Step 4:
Insert cotter pin (3) through the bore in the
retaining pin (4).
Fitting the V-belt
Danger of pinching:
When fitting the V-belt, it must be
ensured that the hands or fingers
do not come between the V-belt
and the V-belt pulleys when
releasing the V-belt tensioner lever.
● Select cutting level 3.
Press V-belt tensioner lever (5) in the
direction of the arrow (forwards) using a
suitable length of pipe and hold.
91