Operation
▸
Push a suitable tool/bit (Würth system accessory)
on to the tool holder [2].
▸
Check that the tool bit is correctly seated.
▸
Set the direction of rotation [4] and torque [3] at
the switch.
▸
Grip the device by the handle [5].
▸
Switching on:
— Press switch [1].
▸
Switching o :
— Release switch [1].
Maintenance / Care
Risk of injury or material damage.
Clean and service the device only
¾
when it is disconnected from the
compressed air supply.
▸
Keep the casing and handle dry, clean and free
from oil. Never use brake uid, petrol or solvent
for cleaning.
▸
Check screws for tight fitting.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/countr -specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling
is not covered by warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer ser-
vice workshop. Subject to technical changes without
prior notice.
We accept no liability for printing errors.
CAUTION !
Environmental Instructions
Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Accessories and spare parts
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
MASTERSERVICE should be arranged. With any
enquiries or spare parts orders, always quote the
item number as given on the device type plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
EC Declaration of Conformity
We herewith declare that this product conforms to
the following standards and directives:
Standards
ISO 11148-6:2012
ISO 15744:2002 / ISO 28927-2:2009
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
Technical documentation with:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
F. Wolpert
Head of Product Manage-
ment, Authorised Signatory
Künzelsau: 25/03/2019
Dr.-Ing. S. Beichter
Head of Quality, Author-
ised Signatory
17