Front Surround; Listening To Audio From The Sub Screen Using Headphones - Pioneer PDP-506HDG Manual De Instrucciones

Adjustments and Settings
09
Item
Off
(factory default)
On
5
Press HOME MENU to exit the menu.
NOTE
• The effect of this function differs depending on signals.

Front Surround

This provides three-dimensional sound effects and/or deep,
rich bass.
1
Press HOME MENU.
2
Select "Sound" ( /
3
Select "Front Surround" ( / ).
4
Select the desired parameter ( / ).
Item
Off
SRS
TruBass
(factory default)
TruBass + SRS
5
Press HOME MENU to exit the menu.
NOTE
• You can also press FRONT SURROUND on the remote
control unit to switch the selection.
• (WOW) designates a status where the FOCUS is on
and TruBass + SRS has been selected for Front Surround.
• is a trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The effect of this function differs depending on signals.
36
En
All manuals and user guides at all-guides.com
Description
Deactivates the FOCUS.
Activates the FOCUS.
then ENTER).
Description
Deactivates both the SRS and TruBass.
Reproduces highly effective three-dimensional
sound.
Provides deep, rich bass using a new
technology.
Provides both TruBass and SRS effects.
Listening to audio from the sub screen
using headphones
With headphones connected, you can listen to audio coming
from the sub screen when in the 2-screen or picture-in-picture
mode; audio coming from the main screen is output from the
speakers. To use this function, follow the procedure below.
1
Press HOME MENU.
2
then ENTER).
Select "Sound" ( /
3
Select "Headphone Output" ( / ).
4
Select "Sub" ( / ).
Front Surround
Headphone Output
Sub Volume
Item Description
Main Audio coming from the main screen is output
from the PHONES output terminal.
Sub When in the 2-screen or picture-in-picture
mode, audio coming from the sub screen is
output from the PHONES output terminal.
5
Select "Sub Volume" ( / ).
6
Select the desired volume level ( / ).
Front Surround
Headphone Output
Sub Volume
7
Press HOME MENU to exit the menu.
NOTE
• To adjust the volume for headphones after selecting "Sub",
always use the menu item (shown in the procedure) no
matter whether the screen is in the single, 2-screen, or
picture-in-picture mode. When the screen is in the single
mode with "Sub" selected, audio coming from the screen is
output from speakers even with headphones connected.
• To adjust the volume of audio coming from the active (or
main screen) with headphones, select "Main" in step 4 then
–
press i +/i
on the remote control unit.
Off
Main
15
Off
Sub
15