Pioneer PDP-506HDG Manual De Instrucciones página 9

Safety Precautions
Safety Precautions
Electricity is used to perform many useful functions, but it can
also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured
with the highest priority on safety. However, improper use can
result in electric shock and/or fire. In order to prevent potential
danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your
safety and prolong the service life of your product, please read
the following precautions carefully before using the product.
1. Read instructions — All operating instructions must be
read and understood before the product is operated.
2. Keep this manual in a safe place — These safety and
operating instructions must be kept in a safe place for
future reference.
3. Observe warnings — All warnings on the product and in
the instructions must be observed closely.
4. Follow instructions — All operating instructions must be
followed.
5. Cleaning — Unplug the power cord from the AC outlet
before cleaning the product. To clean the product, use the
supplied cleaning cloth or other soft clothes (e.g., cotton,
flannel). Do not use liquid cleaners or aerosol cleaners.
6. Attachments — Do not use attachments not
recommended by the manufacturer. Use of inadequate
attachments can result in accidents.
7. Water and moisture — Do not use the product near water,
such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
8. Stand — Do not place the product on an unstable cart,
stand, tripod or table. Placing the product on an unstable
base can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. Use
only a cart, stand, tripod, bracket or table recommended by
the manufacturer or sold with the product. When mounting
the product on a wall, be sure to follow the manufacturer's
instructions. Use only the mounting hardware
recommended by the manufacturer.
9. When relocating the product placed on a cart, it must be moved
with utmost care. Sudden stops, excessive force and uneven floor
surface can cause the product to fall from the cart.
10. Ventilation — The vents and other openings in the cabinet
are designed for ventilation. Do not cover or block these
vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This
product is not designed for built-in installation; do not
place the product in an enclosed place such as a bookcase
or rack, unless proper ventilation is provided or the
manufacturer's instructions are followed.
11. Power source — This product must operate on a power
source specified on the specification label. If you are not
sure of the type of power supply used in your home, consult
your dealer or local power company.
12. Power cord protection — The power cords must be routed
properly to prevent people from stepping on them or
objects from resting on them. Check the cords at the plugs
and product.
All manuals and user guides at all-guides.com
13. The plasma Display used in this product is made of glass.
14. Overloading — Do not overload AC outlets or extension
15. Entering of objects and liquids — Never insert an object
16. Servicing — Do not attempt to service the product yourself.
17. Repair — If any of the following conditions occurs, unplug
18. Replacement parts — In case the product needs
19. Safety checks — Upon completion of service or repair work,
20. Wall or ceiling mounting — When mounting the product
21. Heat sources — Keep the product away from heat sources
22. Unplug the power cord from the AC outlet before installing
23. Never expose the screen of the Plasma Display to a strong
24. Do not expose the Plasma Display to direct sunlight for a
25. The Plasma Display weighs about 31.8 kg (70.1 lbs.) for the
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken
glass pieces in case the plasma Display breaks.
cords. Overloading can cause fire or electric shock.
into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause
electric shock and/or short internal parts. For the same
reason, do not spill water or liquid on the product.
Removing covers can expose you to high voltage and other
dangerous conditions. Request a qualified service person
to perform servicing.
the power cord from the AC outlet, and request a qualified
service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid was spilled on the product or when objects
have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as
described in the operating instructions.
Do not touch the controls other than those described in
the operating instructions. Improper adjustment of
controls not described in the instructions can cause
damage, which often requires extensive adjustment work
by a qualified technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any
noticeable abnormality in the product indicates that the
product needs servicing.
replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those
with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire,
electric shock and/or other danger.
request the service technician to perform safety checks to
ensure that the product is in proper operating condition.
on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
the speakers.
impact, for example, by hitting it. The screen may be
broken, resulting in fire or personal injury.
long period of time. The optical characteristics of the front
protection panel changes, resulting in discoloration or
warp.
PDP-506PG and about 25.8 kg (56.9 lbs.) for the PDP-
436PG. Because it has small depth and is unstable,
unpack, carry, and install the product with one more
person at least and use the handles.
02
9
En