Hitachi 65HL9000G Manual De Instrucciones página 14

Connections
(depending on the model)
Connector Type
VGA
Connection
(bottom)
AUDIO IN
PC/YPbPr
Audio
Connection
(back)
HDMI
Connection
(side&bottom)
SPDIF
SPDIF
(Optical Out)
Connection
(bottom)
BACK AV
Back AV
(Audio/Video)
R Connection
(back)
L / Video
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
/ Video
USB
Connection
(side&back)
Connection
(side)
LAN
Ethernet
Connection
(bottom)
Subwoofer
Connection
(back)(*)
(*) For external subwoofer connection
Cables
YPbPr/PC Audio Cable
Composite Audio Video Cable
Component Video (YPbPr ) Cable
CI
LAN / Ethernet Cable
Device
English - 9 -
To enable PC/YPbPr audio, you
will need to use the back audio
inputs with a YPbPr/PC audio
cable for audio connection. |
When using the wall mounting
kit (available from a third party
in the market, if not supplied),
we recommend that you plug all
your cables into the back of the
TV before mounting on the wall.
| Insert or remove the CI module
only when the TV is SWITCHED
OFF. You should refer to the
module instruction manual for
details of the settings. | The/
Each USB input of your TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV. | By connect-
ing an HDMI cable to your TV,
you have to use only a shielded
(high grade) HDMI cable to
guarantee a sufficient immu-
nity against parasitic frequency
radiation. And make sure to
use a High-Speed HDMI cable
that can transmit high definition
signals, such as 4K contents, for
trouble-free transmission.
If you want to connect a
device to the TV, make
sure that both the TV
and the device are turned off
before making any connection.
After the connection is done, you
can turn on the units and use
them.