Technical Data; Safety Devices - CAMPAGNOLA KRONOS 58 Manual De Uso Y Mantenimiento

Pos. Denomination
1
Handle
2 Front guard
3 Bar guard
4 Control keyboard
5 ON/OFF switch
+/- speed selector
6
7 Operating lever
8 Active safety device
9 Power-supply cable connector
10 Support handle
11 Plug
12 Power LED light
13 Power-supply cable
14 Locking nut
15 Bar
Chain
16
17
Adjusting screw
18
Motor body
19
Serial number sticker
20
Lubricating oil reservoir
21
Electronic board
22 Brushless motor
23 Fixed extension pole
24 Branch-pulling hook
26 Extension pole anti-rotation screw
27 Power unit clamp screw
28 Cutting unit anti-rotation screw
29 Cutting unit clamp screw
3.6

Technical data

• Bar length:
• 10" bar maximum cut:
• Cutting chain:
• Active safety device:
• Automatic bar lubrication:
• Battery voltage:
• Motor:
• Power:
• Consumption:
• Cut quantity with Li-ion 700 battery:
• Speed:
• Chain speed:
• Two-tone LED light:
• Switch:
• Overall tool length:
• Weight of 1300 mm tool:
• Weight of 1900 mm tool:
3.7

Safety devices

• ON/OFF switch (5): Switches the tool on and off.
• ON/OFF LED light (12): Indicates whether the tool is working.
• Active safety device (8): Engages itself automatically when releasing the operating lever and prevents from any acci-
dental tool operation.
• Bar guard (3): Protects the cutting bar during transport.
• Built-in protecting device: Protects in case of motor overheating.
• Built-in protecting device: Protects in case of max current consumption.
Use and maintenance manual – Translation of
original Instruction. : 01 date 15/12/2021
Function
Allows to hold the tool
Protects the pinion and the bar chain
Protects the chain when the tool is not used
Drives the tool operations
Switches the tool on and off
Adjusts the cutting chain speed
Is pressed to operate the tool
Controls the operating lever
Connects the tool to the battery
Allows the operator to hold the tool while working
Allows to add oil to the reservoir
Shows whether the tool is on or off
Connects the tool to the battery
Locks the bar
Drives the cutting chain
Cuts branches, trunks, etc
Adjusts the chain tension
Is the seat of the motor and the electronic boards
Shows the tool identifying details
Contains the oil for the bar and chain lubrication
Drives the tool functions
Gives motion to the chain
Supports the tool and makes easier working from the ground
Helps the operator to clean the cutting area
Avoids extension pole rotations
Locks the extension pole on the power unit
Avoids rotations of the cutting unit on the extension pole
Locks the cutting unit on the extension pole
10"
Ø 150 mm
1/4"
Yes
Yes
58 V
Brushless
1200 W
20-25 Ah
Over 600 cuts of 10 cm Ø
6 choices
from 11.4 m/sec to 14.8 m/sec
green color to indicate the tool switching on, red color for the
maximum consumption
ON/OFF
1300 mm / 1900 mm
3.250 kg.
3.750 kg.
Page 29