Environmental Information; Glossary - Wega ALE Manual De Uso Y Mantenimiento

Your cooperation in the correct disposal of this prod-
uct will contribute to the effective usage of natural re-
sources and avoid incurring the administrative sanctions
provided by law. For more information about recycling
this product, contact your local authorities, the body
responsible for waste collection, an authorized dealer,
or your household waste disposal service.
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
To dispose of the machine, it is advisable to refer to the
Manufacturer's Qualified Technician.

Environmental information

12.2
Inside the machine there is a button lithium battery
required for the storage of the data that is placed in the
electronic card.
Dispose of the battery in accordance with current
local regulations.
13.

GLOSSARY

This chapter lists uncommon terms or terms with
different meaning from the ordinary.
Below is an explanation of the abbreviations used and
the meaning of the pictograms to indicate the operator
qualification and the machine status; their use allows to
quickly and uniquely provide the necessary information
for proper use of the machine in safe conditions.
Danger
A potential source of injury or damage to health.
Dangerous area
Any area in the vicinity of the machine where the
presence of a person constitutes a risk to the safety and
health of that person.
User
The person in charge of operating, servicing and
cleaning the machine indicated in this manual.
60 216
of
Risk
Combination of the probability and severity of an
injury or damage to health that can arise in a hazardous
situation.
Guard
Machine component used specifically to provide
protection by means of a physical barrier.
Personal Protection Equipment (PPE)
Equipment worn or held by the person for health or
safety protection.
Intended use
The use of the machine in accordance with the infor-
mation provided in the instructions for use.
Manufacturer's Qualified Technician
A specialist, specially trained and qualified to make
the connection, installation and assembly of the ma-
chine; use special equipment (hoists, forklifts, etc.);
perform routine or unscheduled maintenance which
is particularly complicated or potentially dangerous if
performed by the user.
User qualification
Minimum level of skills an operator must have to carry
out the operation described.
Machine status
The machine status includes the mode of operation
and the condition of the safety devices on the machine.
Residual risk
Risks that remain despite adopting the protective
measures integrated into the machine design and de-
spite the guards and complementary protective meas-
ures adopted.
Safety component:
• required to perform a safety function;
• whose failure and/or malfunction endangers the
safety of persons.
USER manual