PERMITTED USES
All uses compatible with the technical
characteristics, operations and applica-
tions described in this document that
do not endanger the safety of the User
or cause damage to the machine or the
ROSSO
C:0 M:100 Y:100 K:0
environment.
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
All uses not specifically mentioned in this Manual
are prohibited and must be expressly authorized
by the Manufacturer.
INTENDED USES
The machine is designed exclusively for
professional use.
The use of products/materials other
than those specified by the Manufacturer,
which can cause damage to the machine
and dangerous situations for the opera-
tor and/or those close to the Machine, is
considered incorrect or improper.
CONTRAINDICATIONS OF USE
The machine must not be used:
• For uses other than those listed in par.
2.4 , or for uses not mentioned in this
Manual;
• With materials other than those listed
in this Manual;
• With disabled or not working safety
devices.
42
216
of
INCORRECT USE OF THE MACHINE
The type of use and performance this
machine is designed for, imposes a num-
ber of operations and procedures that
cannot be changed, unless previously
agreed with the Manufacturer. All allowed
practices are contained in this document,
any operation not listed and described
in this document is to be considered not
possible and therefore dangerous.
IMPROPER USE
The only permitted uses are described
in the Manual, any other use is to be
considered not possible and therefore
dangerous.
GENERAL SAFETY
The user must be aware of the risk of
accidents, the devices designed for safety,
and the general rules on the safety provid-
ed by EU directives and by the legislation
of the country where the line is installed.
Users should be aware of all machine
devices operation.
They must also have fully read this
manual.
The maintenance work must be per-
formed by qualified technicians after
specially preparing the machine.
Tampering or unauthorized substitu-
tion of one or more parts of the machine,
the use of accessories that modify the use
and the employment of materials other
than those recommended in this Manual,
may become a cause of accidents.
USER manual