Design; Assembly - GOK BC-2 Instrucciones Para El Montaje Y El Funcionamiento

DESIGN

ASSEMBLY

Before assembly, check that the product is complete and has not suffered any damage during
transport.
Mounting the display unit
2.
Mount the display unit to the wall in a suitable position.
1. Open the display unit by removing the bottom cover.
2. After loosening the 2 screws, open the display unit by removing the cover.
3. Mount the display unit to a smooth vertical wall by means of dowels. Mount the housing
of the display unit by the four fixing holes with the enclosed screws and anchors. Take
care not to damage the housing.
4. After ELECTRICAL INSTALLATION and connecting the terminals, replace the covers.
Artikel-Nr. 15 707 50
1.
Screw-in unit
Probe protective pipe
Sensor
Connection cable
LED Operation
Button Reset Alarm Sound
Button Test
LED Alarm
Indicator
BC-2
25 / 133