Olivetti JP 90 Manual Del Usuario página 24

All manuals and user guides at all-guides.com
Windows® 95
To choose the driver language you require and then install
the driver using the "Plug and Play" feature, proceed as
follows:
Your printer must be powered, connected to your PC and
NOT in error mode (no LEDs flashing).
1. Insert the specific driver diskette in drive A (usually) of
your PC.
2. Activate Windows® (if necessary, consult your Windows®
user manual).
3. Press Start and select the option Run....
4. Type " a:\?????" (your printer name, as indicated on the
diskette label) and press Enter/Return.
A screen indicating the language selection is displayed;
follow the instructions on this and the subsequent screens,
to configure the language you require. Once the language
configuration is completed, the Desktop screen will be
redisplayed.
5. Now restart Microsoft® Windows® 95 (execute the "shut
down" command and restart from Start).
6. A window, indicating that a new peripheral has been
detected (New hardware found and the printer name), is
displayed.
The same window shows the Driver from disk provided
by hardware manufacturer option already highlighted.
Click on the OK button.
6
7. With the Install from Disk window displayed, insert the
specific driver diskette in the drive selected, specify this
drive and click on OK.
8. Your printer name is displayed in the Select Device
window. Click on OK.
9. The Add Printer Wizard window is displayed. If there are
no printer drivers already installed on your system, your
printer will be installed as the Default printer. If other
drivers are already installed, you will be asked if you want
to use this printer as the default. Click on Yes.
10. Click on Next. The same window will prompt you to print
a Test Page. Click on Yes, if you want to be sure that the
driver has been installed correctly. This page also gives
you a list of all the files that have been copied into your
system during installation.
11. Your driver is now installed. A window will ask you if the
test page has been completed. An affirmative reply
indicates that the driver is installed correctly.
For further information, consult your Windows® 95
documentation.
Your printer is now ready to operate in Windows®
environment.
For more details on the drivers and printer set-up, see
"Using Software" in the User Guide.
Quick Start