Using Software; Modifying The Parameters In The Windows - Olivetti JP 90 Manual Del Usuario

All manuals and user guides at all-guides.com

Using Software

This section explains how to change the printer settings by
varying them in your printer driver, or using the printer set-up
utility contained on one of the two diskettes supplied with the
printer.
Your printer has a number of parameters which you can
define according to your specific requirements. Your printer
driver contains most of these parameters which can be
defined (using Control Panel) when you install the driver.
The parameter settings defined in the driver always have
priority over the settings made using the set-up utility.
22
Modifying the Parameters in the
Windows® 3.1/3.11 or Windows® 95
Drivers
The monochrome multilingual Windows® drivers on the
diskettes supplied optimise all the features and functions of
the printer. First install the printer driver in the language you
require (see Quick Start ) and then check that the default
parameters of the driver correspond to the type of print-out
you require.
If you installed the driver using the Plug and Play feature,
you can configure the monochrome driver by opening the
Printers folder, highlighting your printer icon and clicking
on the Properties tab.
Otherwise, proceed as follows:
•
Open Windows®.
•
In Program Manager, activate the Main menu and then
Control Panel, clicking twice with your mouse indicator on
the corresponding icons.
•
From Control Panel menu, activate the Printers dialogue
box, in the same way.
•
To alter the default parameters, click once on Setup; the
following parameters are proposed and can be altered, if
necessary:
– Resolution (dpi): selection of graphic densities (600,
300, 150, 75 dpi).
User Guide - Using Software